Return To Main Page
See all our previous broadcasts

Discoveries made in dual application of N and P
 using Yielder Drills and Aqua Ammonia.

TAPPS/TAPPKTS


Crystalline TAPPS

1

Binary Banding 22.5/7.5, 5 section,  4515 Exactrix Mustang Positive Down pressure TC Tool Bar and the Yielder 2900 Steering Track Cart goes to work at GSF, The NC+ Breeder of Channel Seed Corn.  Operating with a Deere 9520 Row Crop Quad at Shelton, NE, May 16, 2019. Difficult and wet conditions prove that tracks really work in No-till.


Click Here for Field Operation.

Click here for full video https://vimeo.com/bandbvideo/review/337811713/33b051a4ab .   Check out Binary Banding the massive but delicate process of applying nutrients at 1% CV in deep bands.

Mustang Exactrix Banding Nutrients at 9.5 mph in Binary Banding Mode of 22.5 x 7.5, splitting soybean and corn rows in No-till.

Allowing the 60 foot 24/30 corn planter to plant directly on top of the Exactrix TAPPKTS Band the same day by banding to 7 to 8 inch depths.  

Here is why nutrients are combined with root pattern geometry to drive yields up another notch. Achieving record field wide averages using VRT application at 1% CV. The machine and the expert management lifts yield expectations to the 300 bushel per acre range in commercial corn production.

Nominal increases over askew Exactrix Mustang will average between 5 and 10% above previous yield levels in the 270 bushel to 290 bushel per acre range for commercial corn. Micro nutrients and efficient utilization of KTS is possible with a third product 2KR Blender with TAPPKTS bands directly under and along-side each corn row.

Seed corn production for Channel dealers using high quality inputs of Exactrix TAPPKTS with Micros. The Exactrix Binary Bands brings out the best in seed quality with power packing of nutrients into the seed with balance nutrition in tough weather conditions.

Power Packing of Seed is a well-established practice utilized in Washington State by the Crop Improvement Association for raising high quality seed on nutrient packed potato soils.

Discoveries made in dual application of N and P using Yielder Drills and Aqua Ammonia.

Since 1986 and earlier it has been known that fertilizer nutrient deep bands can be too concentrated with Ammonium when dual placing P, K and S….discoveries were made with Aqua ammonia using Yielder® No-till Drills in the PNW.  

Why are 24 inch and or 30 single bands of crop nutrients non-desirable and difficult  to justify when dual placing N as NH3 and P? 

Exactrix testing indicates that a 15 inch band has the equivalent of 70 pounds of N as NH3 as compared to 140 pounds of N as NH3 on 30 inch centers. Thus the band has become dilute and frees up the placed P for high crop availability.  

A waiting period is required for the band pH to adjust. This waiting period is very difficult  based on the business opportunity and weather. The goal is to improve yields using single pass drills and pre-plant banding in 2 pass production…A Waiting period is required.  

Discoveries made by Harapiak and Beaton are included. 

Highly concentrated Bands of NH3 (20 inch to 30 inch) require a waiting period when P is dual placed with NH3 in shank type application and a Non-Exactrix and a Non-Mustang application.  

The band concentration is often referred to as “Hot Bands”. The phosphate will not be crop available for up to 30 days due to elevated pH.  

Exactrix overcomes this problem by diluting the bands down to 18,15, or 12 inch band centers….The Exactrix Mustang P-51C and CUE then dilutes again with” Vermiculation” . The Exactrix exclusive vertical mixing technique dilutes the bands further in a vertical column from 2 inch to 8 inch depth.  

An Exactrix P-51 vermiculated vertical band improves the availability of nutrients like placed P….the opposite would be a “Bow Tie” application of NH3 locating the NH3 band deep which requires tillage and does not allow for mixing with APP and NH3.  

It Works Every time,

How can Exactrix Mustang Tool Bars deep band TAPPS and TAPPKTS in the same field during the same day with the planter?  

How can the corn or cotton planters plant expensive seed directly on top of the dilute 12 inch or 15 inch TAPPS or TAPPKS Band of “Super Ammoniated APP/ATS/KTS? 

What is the T Band and why is it so important?

Thus the No-tillage success of Exactrix rests with these 3 factors.

Number 1. Exactrix NH3 injected at 1% CV uniformity forming Tri-Ammonium Crystalline Poly Phosphate, Thio-Sulfate (Thio-sul®) chemical mixing. TAPPKTS is formed inclusion of KTS® . KTS has revised 2019 pricing. KTS is award winning and KTS is economically competitive up to 100 times more competitive than KCL applied top dressed.    
Number 2.
Much deeper bands to 8 inch depth are practical with Mustang openers.
Number 3. Dilute and vermiculated No-tillage band centers of 18, 15 and 12 inch width at depths of 8 inches. 

A 20 inch band center is technically the end of  the line…and is to be avoided unless a waiting period is implemented. Yield loss can be subtle and difficult to surmise on 20 inch centers.

2

 What is Binary Banding? 
Why is there an 8% yield punch over askew Exactrix Mustang Banding in irrigated corn production?

3

 

4

 

5

 

6

Follow-up on Binary Banding Exactrix June 15, 2019 Broadcast e-mail covers Soybeans and Cotton.
From the video…June 15 A quick review of how corn emerges with Corn rows on top of TAPPKTS bands.
Do Soybeans respond to Binary Banding on the Great Plains?
Yes 20 Million acres can be properly fertilized for 30% to 50% low cost VRT-Site Specific Soybean yields with Binary banding.  

June 30, 2019 Broadcast.
How to prepare for top yields and lowest costs in Alfalfa production. Planning ahead with KTS and APP and critical micros.  


Guy Swanson
Your Great Plains Reporter.  
                


John Cory
Security West Financial

Call your new banker, John Cory, Security West Financial.
http://swfinco.com/contact.html   (509) 994-8555 You can go off the balance sheet and work with the best using the strength of Farm Credit and others.

John will help you spend about $40,000 annually to make $150,000 more annually by spending only $60 per acre in irrigated production for fertilizer. John understands the cycles of agriculture and how to keep your balance sheet looking good.

At the end of five years you will own a powerful machine that continue to produce good returns having already been paid for at the end of the first year.  You can even apply for your neighbors with a Mustang Tool Bar.

At 1,000 acres of corn, An internal bottom line savings of $750,000 over five years on 5,000 acres of corn.  

An Exactrix Mustang Tool Bar capable of producing $550,000 of internally available funds in five years.   


  See Video 

Top yields, best margin and the new leader in VRT-Site Specific, Small Grains Expert. Eric Odberg at Genesee, Idaho breaking winter wheat yield records. Exactrix TAPPS at Catholic Canyon using 4 management zones. Exactrix Site-Specific, Variable Rate
EO.htm

"Paul Gangwish, Drone Video"
Track Machines improve production 200%.
Application time cut in half at 1 acre per minute.
Up to $150 more net income per acre.

The 2017 Agronomy Review.
http://www.exactrix.com/Broadcast_12_29_2016.html

Meeting your formulation needs. www.exactrix.com/TF.htm  

Picking your metering systems. www.exactrix.com/epm.htm  

Need more information on advanced crop production.   www.exactrix.com/EWAC.htm

 

For More Information:
509.254 6854