|
Powerful Crop Production
Economics at Higher Yield Levels and Site Specific
Application lowering cost of expensive materials.
Exactrix, 2KR in low CV Application and
Absolute Positive Displacement, High Pressure,
Precision and On-The-Target application of micro-nutrients and
stimulants.
Click HERE
To See The 2KR Training Video
Exactrix is known to make many of the
inclusive micro-nutrients, stimulants, CEC improvers and connectors work economically well.
Plant Growth and Root Stimulating
Materials used with the 2KR technology with Site Specific Application.
Plant Growth and Root Stimulating
Materials used with the 2KR technology with Site Specific Application.
1. Ammoniated Metals. Numerous suppliers.
http://www.uaex.edu/Other_Areas/publications/PDF/FSA-2169.pdf
http://www.micronutrientfertilizer.com/micronutrients.htm
2.
Chelated Metals. Numerous
suppliers.
http://www.uaex.edu/Other_Areas/publications/PDF/FSA-2169.pdf
http://www.tetramicro.com/page/1003/product/overview.html?inet=aD1jZWJxaHBnL
3.
Rare Earth formulations of
Lanthanum, Neodymium. Contact Exactrix.
4. Zinc ASA, Root Growth
Stimulator.
NULEX ROOT GROWTH STIMULATOR 14-0-0, 17Zn
http://www.puregrade.com/labels/NXLBL-RGS.pdf
http://www.uaex.edu/Other_Areas/publications/PDF/FSA-2169.pdf
5. Rooting Hormones and vitamin B.
http://www.uaex.edu/Other_Areas/publications/PDF/FSA-2169.pdf
6. Soygreen
http://www.westcentralinc.com/Product/Soygreen.aspx
Soygreen
http://www.westcentralinc.com/Product%20Sell%20Sheets/Soygreen.pdf
7.
Avail
http://sfp.com/product-labels/AVAIL-for-Liquid-Phosphate-Fertilizer-Label.pdf
8. Selenium. Selenium
Elemental Symbol
http://www.americanelements.com/se.html
9.
Nickel .
http://www.plantphysiol.org/content/85/3/801.full.pdf
http://en.wikipedia.org/wiki/Nickel(II)_sulfate
Nitrogen Stabilization Materials.
http://www.uaex.edu/Other_Areas/publications/PDF/FSA-2169.pdf
10. Guardian or DCD
http://www.conklin.com/site/edwin/
Ed's E-mail:
EDWIN.KROEGER@CONKLINIBO.COM
http://www.productionadvantages.com/GuardianSpec.pdf
www.exactrix.com/DCD.htm
11. Ammonium Thio-Sulfate.
http://cropvitality.com/
http://umanitoba.ca/faculties/afs/agronomists_conf/media/Dec_13am_4_Goos_presentation.pdf
12.
Hydrogen Peroxide.
http://en.wikipedia.org/wiki/Hydrogen_peroxide
http://www.foodgrade-hydrogenperoxide.com/id30.html
13.
Mild Hydrogen Chloride.(Purex, Clorox, Muriatic Acid)
Hydrochloric Acid 20lt
http://hpd.nlm.nih.gov/cgi-bin/household/brands?tbl=brands&id=16025016&id=16025016
http://rockbond.co.nz/product/hydrochloric-acid-30-33-spirits-of-salts-20lt-2/
14.
Fluidized Potassium Chloride. Contact Helena
Chemical. 0-0-15-10Cl
http://www.ipipotash.org/udocs/Chap-1_potash_production.pdf
15.
Nutrisphere
http://sfp.com/product-labels/Nutrisphere-N-for-Liquid-Nitrogen-Fertilizer-Label.pdf
Article by Dr. Bert Bock, Senior Advisor
Co-Injecting
the Nitrification Inhibitor DCD with Ammonia: An Innovative Approach to
Reducing Nitrogen Losses
Carbon Based Organic Materials CEC Improvers, Connectors.
http://www.fbsadvantage.com/
1.
Humic and Fulvic Acids,
Contact Helena Chemical, Hydra Hume, Nutech Connector, Carbon Boost.
http://www.uaex.edu/Other_Areas/publications/PDF/FSA-2169.pdf
http://www.helenachemical.com/products/PDF/92205HydraHumeCrop.pdf
2. Oil of Mustard (high Glucosinolate).
Contact Exactrix or the University of Idaho. Brassica Breeding and Research
http://www.uidaho.edu/ott/technologies/agriculturetechnologies/canola_mustard_rapeseed
http://www.oekotec.ibg-monforts.de/en/oil-presses.html
3. Oil of Dwarf Essex. Contact
Exactrix or George F Brocke and Sons
http://gfbrocke.com/products/
http://www.oekotec.ibg-monforts.de/en/oil-presses.html
4. Oil of Neem.
http://www.arbico-organics.com/product/neem-oil-concentrate-insecticide-fungicide-miticide/
BONIDE® Neem Oil Concentrate - 1 Pt.
http://npic.orst.edu/factsheets/neemgen.html
http://www.ipm.ucdavis.edu/TOOLS/PNAI/pnaishow.php?id=53
Calcium and Carbon Based Materials. Injected outside the Ammonization band
or on top of the band with Looking Glass Manifolds in 3 product delivery.
1. Calcium Sulfate Fluidized.
2. Calcium Chloride.
3. Fluid Lime.
4. Coal Dust, Fluidized.
Inoculants In Alfalfa and Soybean Production.
1. Alfalfa and Soybean, Differential
Laminated banding of 0-52-0, 0-0-25K-17S, Liquid Streaming flow of inoculants below the seed row.
http://www.beckerunderwood.com/
Alfalfa Inoculant - 6Oz.
http://intxllc.com/files/53fc/N-DURE%20(Alfalfa%20True%20Clover%20Combination)%20Specimen%20Label.pdf
Advanced producers get good returns
with 3rd product injection.
Producers are making additional net margin by employing non-adjunctive
blending of stimulants that create a strong plant root system in
drought stress.
Triplex injection is practical with 2KR and Looking Glass Manifolds.
Any type of missing link fertility program can become a lot of fun with
Exactrix 2KR technology.
The 2KR makes a lot of money for producers that want to make difficult
materials work better in the root zone.
The 2KR may reinvent the Lanthanum Rare Earth application of plant root
stimulation in perennial crops, sugar cane, grass seed, trees and vines.
Producers and scientists interested in Rare Earth can now work with annual
winter crops like winter wheat, winter triticale, winter canola, winter
barley and winter pea as these fall crops respond to Rare Earth.
Reduces cost by improving efficiency and hitting the target need.
Chelated micro nutrients are not required in the metals group of micro-nutrients.
The 2KR saves about $5.00 per acre in corn production when there is a 2
pound per rate of Ammoniated Zinc and the APP rate must be raised to avoid
sequester of the placed P.
The 2KR allows DCD Guardian to be selectively injected with ATS to provide
double indemnity protection and stabilization, and delaying conversion to
negative valence mobile nitrate.
Guardian can now be economically functional whereby much lower rates of
applied N can be utilized.
Advanced VRT prescriptions operating the 2KR allows more crop effective
and economic response based on soil color using Humic and Fulvic acids like
Hydra Hume.
The 2KR mobile blender raises potential for Hydra Hume utilization. Allows
the Hydra Hume to be increased on low CEC eroded soils.
A good way to work with nasty materials…the 2KR raises the potential
with nasty chloride based materials such as mild hydrochloric acid or ammonium
chloride and Iron chloride in Soybean Production on high pH soils.
The 2KR is a simple way to get third product injection quick… the third
product in VRT combinations has quick response injection.
Allows the 3rd manifold system to be installed for Organic stabilizing
materials such as Pacific Gold Mustard Oil, Neem Oil and Dwarf Essex.
The third product design works well with Triplex Injection in the P-51C,
Mustang Openers, Deere, and Case SDX .
The 2KR is compatible with all controllers, ISO and ISO-Bus. Deere,
Trimble, Ag Leader, Raven.
Micro Nutrient application per acre rates can vary greatly in application
flow ranges.
Two Flow Ranges are covered in the 2KR design injection into Final Filters
or injecting into the Sparging Reflow Blender.
1. Low Range Flow is 2 ounces to 90
ounces per minute.
2. High Range flow is .2 gallons per
minute to 3.5 gallons per minute is accomplished with ball valve change.
Two Flow meters are utilized and both operate at the same time providing
double verification to the operator station.
Orifices installed in line and after the regulating Arag flow-meter are
used to make accurate flow division of 10 to 1.
In Low Flow Range the regulation of the 2 ounces to 90 ounce per minute
flow is accomplished by the smallest available Arag Magnetic Reluctance flow
meter.
The 3 cylinder pump regulation and pressure delivery of the Micro-nutrient
is accomplished with a 10X flow of the actual metered flow.
The Low Flow range metered flow is divided by two orifices after the Arag
magnetic reluctance flow-meter.
The Low Flow range metered flow is 1/10th of the regulated flow with
magnetic reluctance Arag Magnetic Reluctance Flow-meter.
The balanced flow split is accomplished using a .035 metering orifice
dividing from a .125 return to tank orifice.
The ball valves with Green Plates shown are used to set the low flow
range.
Green Plates are actuated components that operate in the Low Flow Range.
Red Plates are components used to set the positive displacement pump rpm
at a base line of 100 rpm.
Red Plates stabilize the injection flow
allowing a large 22 gpm pump to operate in a
very low flow range.
Non Regulating Flow Meter, Paddle Type for Verification of 1/10th orifice
delivery flow.
The low flow, 2 to 90 ounce, micro flow injection is monitored by a
paddle type, flow meter. The verification flow meter is shown just above the Arag
Flow Meter.
The flow confirmation and feedback does confirm meter flow to the mixing
chamber. A good high pressure blend results at the inlet to the final
filter.
A non-critical component is the paddle type flow meter in Low Flow Range.
The Blackbird flow meter readout in the cab is the verification of the
very low injection flow back to the operator.
A flow indicator is utilized to assure the operator of a quality and
timely delivery to the mixing chamber of the final filter.
An electronic pressure gauge also confirms delivery is timely. The
pressure wave can be observed by the operator in VRT application to set the Look
Ahead feature.
Certain types of Micro-nutrients are black and contain suspended solids.
The materials like Hydra Hume block the view window of the Vis-gauge
window(Red Ball).
Vis-gauge flow indicators cannot operate at 350 to 600 psi pressures.
The injection flow to the blending components is confirmed to the operator
by observing the Blackbird Tachometer.
The paddle flow meter sends it’s flow signal to the Blackbird
Tachometer.
The flow-meter is a paddle type 10D that is known to very reliable and
easily cleaned with non-adjunctive materials that are blended with
standard
APP/ATS/KTS.
A uniform flow split to each final filter is confirmed with metering
orifices located at common manifold.
Electronic Ball Valves control the booms section in Auto Boom control.
Back flow stainless check valves are utilized to provide redundant back
flow checking in combination with flow dividing
orifices at .035.
A pressure drop occurs across the 20 psi back flow check valve assuring
timely delivery and mixing equally across multiple manifolds.
Orifices located in the flow splitter balance each section of the machine
under all nominal flows.
Poly final filters allow very high pressures and are compatible with
non-adjunctive materials that are chloride based.
All materials are compatible with acid based fertilizers utilizing
stainless steel and Elastomeres and plastics that are compatible with low pH
materials.
2KC Weigh Master, 2KP TAPPS Formulator, 2KR Micro Nutrient Injection.
Certified Rebuild following 5 years of service, 2KR added for producer
Marty Jespersen at Taber, Alberta,
Let’s Get Started…Exactrix will design a system for you.
Frequently Asked Questions.
Contact Exactrix for Answers.
Learn the 10 most common questions of three product injection.
exactrix@exactrix.com
or call 509-535-9925
Making Soygreen Applications with Variable Rate Site Specific.
http://www.exactrix.com/Broadcast_12_22_2013.html
|
