The 2019 Corn Production Margin Got
Hybrid Corn Yields crowd 300 bushels per acre.
Winter Wheat Yields Outstanding, 2.5 crops in one year.
Yields were120 bu to 130 bu./a. No commercial NPKS or micros fertilizer types were applied to this crop due super saturated soils and poor market prices for wheat. No TAPPS or TAPPKS was applied to the 2019 crop.
The residual Mustang deep bands of TAPPS in No-tillage from 2013 thru 2018 (6 crops) developed the unbelievable crop with abnormal rainfall. A fungicide treatment was made in late April with a small of amount of solution 32 included. The sprayer tracked up the field.
Exactrix No-Tillage Rotational Band Loading of 6 years of dryland wheat and corn supported the highest field wide yields ever generated along the Arkansas River at Deerfield KS. The record yield required twice as many combines, bank-out wagons and trucks to haul wheat about 10 miles.
The wheat crop came off the 7,000 acres in record time fighting tornados and hail all the way to the bin. At the last 90% of the acres the race was won, harvest production was reduced to two combines. At the end with 10% acres left to go the two extra combines and stripper headers were sold back into the harvest machinery market to allow other Kansas farmers access to the stripper machines.
Check out Casey Sower at Triple G Partners banding TAPPS. http://www.exactrix.com/Broadcast_06_26_2015.htm
Read About Joe, https://www.bookstore.ksre.ksu.edu/pubs/L938.pdf
High Quality Brewing Barley at maximized yields with $27.00 of TAPPS.
Read About Eric, http://www.exactrix.com/Broadcast_08_12_2019.html
Read About Gary Dick and Kevin, http://www.exactrix.com/Broadcast_09_03_2019.html
Study Tom Fairweather’s hard work in developing a Potassium Thio-sulfate. http://www.exactrix.com/Broadcast_01_09_2019.html
Improving Pasture land to high carrying capacity with returns that beat irrigated corn production returns every time.
Banding into Hybridized Coastal Bermuda Grass Production with Mustang TAPPKTS plus micros. http://www.exactrix.com/Broadcast_07_10_2019.html
Why is Nebraska off 10% of typical yields?
Why did Kansas become dominant in high yield?
Why did Idaho prove up outstanding brewing barley?
Exactrix® Rotational Band Loading was the major contributor to very high yields with No-tillage.
Exactrix® TAPPS and TAPPKTS plus micros certainly helped prove the weather was a very big factor.
Exactrix® proves again and again in No-till soils….… Less is More.
Why does Exactrix® TAPPKTS with micros always outperform solution 32-0-0 and or dry NPKS in yield and economic performance?
Do not miss out.
Maintain your edge in the game of production.
Your major advantage is liquid injection of NH3 at pressures to 300 psi into streaming flows of APP, KTS® and micros.
Here is your answer. http://www.exactrix.com/Broadcast_09_30_2019.html
The Great Evener of Profitability….The Weather is the single biggest uncontrolled input…in irrigation or dryland Exactrix NH3 assures the best margin in good weather or bad weather.
Good Weather, Bad Weather, Exactrix® TAPPKTS with micros moves more money to the bottom line.
That means the Exactrix® generated low rate application with crystallization for stability is powerful allowing fall banding.
The low investment rate in nutrients wins every time because it is more crop available with Exactrix Mass Flow.
The yield curve comes up fast and allows higher yields in tough weather…..and also less is invested.
There are more net dollars and better production margins when Exactrix® NH3 is the primary nitrogen source forming 1% CV TAPPKTS at band depths of 7 to 8 inches.
In all commodity crops across Canada, The USA and even Mexico…Exactrix® NH3 is always the best choice in crop production.
http://www.exactrix.com/Broadcast_08_12_2019.html All farm sizes work well with Exactrix NH3.
Across North America, producers that have Exactrix greet the banker with a smile.
There is always more margin and a lot less risk with Exactrix® TAPPKTS with micros.
Some producers have very large farms and meet or exceed their expectations with Exactrix Mustang tool bars. http://www.exactrix.com/Broadcast_04_23_2018.html
At $65 to $70 per acre for all nutrients… for year 2020 fall banding is very economical.
The budget is made with 125 lbs. N as NH3 with $26.00 of NH3 and 20 lbs. P, 20 lbs. K and 15 lbs. S at $35 and $5.00 for AZn and Micros.
About 7% to 8% of the gross for nutrients in irrigated production…..and another 6% to 8% for yield punch….That is a 12% to 15% improved net margin.
Up to $150 more net income in irrigated production and $60 more net income in dryland corn.
Exactrix® producers are generally larger and enjoy a better farming career when costs are reduced with No-tillage.
Exactrix® solves the nutrient management problem.
No other technique is more accepted than 7 to 8 inch Mustang Banding by some of largest and best producers in USA and Canada.
Sleep well young farm family ………….you have a technological hedge and lowest cost of production.
The environmental solution with lowest GHG emissions, Exactrix® TAPPKTS with Micros is especially competitive for large producers.
Green House Gas Emissions are lowest with Ethanol and Exactrix NH3 application in No-Till. VRT site specific application goes to the highest levels.
No other combination will out-compete Exactrix Generated Corn Ethanol or EGCE as fuel blends reach 27%E by 2015.
Note: The Economics of NH3 Storage.
At $100 per ton, That is 6.1 cents per lb. of N….Multiply out your farm needs per 1,000 acres of irrigated corn with Exactrix TAPPKTS at 127 lbs. N per acre.
The storage savings per pound of N is 6.1 cents (at $100 per T) to 8.54 cents ($140 per T) to $17.08 ($280 per T) ….. that is $7,740.00 to $10,870 to max $21,1740 per 1,000 acres.
Plus you are not applying at the 250 lb. N per acre rate of an old fashioned NH3 system, or a low pressure NH3 system.
The efficiency of 300 psi high pressure injection at 1%CV provides166% more crop available N. This is so accurate with Mass Flow that another $30 to $45 per acre goes back in the kitty.
The Storage Credit range is is $7.74 to $10.87 to $21.17 per ton typically depending on the retail price, spring or summer, fall or winter.
The efficiency credit is $30 to $45 dollars acre for lost N and depends on the source of N also.
The bottom line improves $40.00 to $55.00 per acre. That is a lot of money at up $55,000 per 1,000 acres. The yield punch of Exactrix TAPPKTS and Binary Banding brings forward another 8% to 18% yield increase.
Currently, October 1, 2019 NH3 is available for a fill-up at $320 to $340 per ton…and the NH3 retailer offers Anhydrous Ammonia at $480 to $599 per ton in the spring according to DTN and Exactrix owners observing retail vs. on farm storage NH3.
Note 1, April 19, 2019, DTN Retail Survey,
A 176% price swing is observed at Oct. 1, 2019. The big difference is the 30,000 gallon NH3 tank, when compared to April 1, retail. You the producer must pick up the NH3 trailer up at the fertilizer dealership. If the fertilizer dealer delivers to your farm you will pay. Delivery normally adds, another $75 to $100 per ton to pick up and return of the 1,000 gallon trailer. This 1,000 gallon trailer tank program is an old Coop system that does not exist or never did exist in the western US and Canada. On farm storage is key in the west on large farms with long distances between farms.
Exactrix is a total business opportunity for every producer that uses 70 ton or greater of NH3 annually.
A high quality used 30,000 gallon to 90,000 gallon NH3 storage tank is good buy at $45,000 to $90,000.
8 9 10 11 Click Here for Field Operation.
Plus you own the NH3 and the storage….you have it on your farm and ready to go……you can apply in bad weather irrespective of the fertilizer dealer support…you can run all night….You can work on weekends in the spring.
Note 2, Don’t Get Fooled,
You can go to fall football games ….knowing that you own next year’s NH3. It is on the farm. There will not be a hype or a fertilizer supply crisis in the spring. An annual event, The Fertilizer Crisis shows up every 12 months?
You remember all those years of fear marketing from the local fertilizer supplier. “We may not be able to get NH3” and this marketing comment adds another 10 cents to the price. The comment starts with the oligopoly manufacturer. The producer should always buy when demand is very low. There is never enough storage when demand is high for NH3.
Storage of NH3 stabilizes the price and keeps the NH3 owner in the driver’s seat.
Storage of NH3 is favored by the fertilizer industry.
Note 3. Safety.
The ammonia is paid for in the summer or fall with a fill-up when NH3 prices are at their lowest. Maybe as low as $280 per ton if you are quick on the draw in summer 2019.
There are several more advantages (about 20 more) that we need to talk about including improved safety and modern delivery to the field.
Producers have a really good chance at top yields with Exactrix NH3 and TAPPKTS.
Storage is Key….in every case. The used tanks are always in demand. Get a quote from Exactrix.
Quick and Easy, This is one of
the best decisions of your farming career.
Every-time…Exactrix NH3 works…NH3 gets better and better with Exactrix®.
A true statement. “Exactrix NH3 is 166% more crop available.” Don’t be fooled by poor schooling and lack of correct training.
The industry also prefers stabilized NH4 in the deck as TAPPKTS with micros.
Power Play Producers, The Power Forwards, The Triple Threat Quarterbacks….avoid the mistakes of solution 32-0-0 and use “the Real McCoy”, deep banded NH3 forming NH4 at 7 inch to 8 inch depths in Binary Banding.
This is a career changing decision for the next generations to come.
Have you ever wondered why is Exactrix® NH3 as TAPPKTS™ and micros so economical? http://www.exactrix.com/Broadcast_09_30_2019.html
Yes even Alfalfa performs better with NH3
as TAPPKTS plus micros in the growing crop with Mustang banding deep at 7
to 8 inches.
An Exactrix, TC 4515 eats acres at 45 feet with 15 inch average band centers or 7.5 x 22.5 Binary centers. The Mustang Tool Bar is built in a 5 section fold design with a narrow, 6 row center.
The positive wing down pressure 7 x 7 bar is mounted with P-51C openers in Binary Banding for 30 inch row corn.
Exactrix Engines are 2KC Weigh Master, 2KM Weigh Master with Sparging Reflow and a 2KR Blender. Three products are delivered in VRT-Site Specific at 1% CV of application.
Exactrix TAPPKTS bands with micros are located directly under corn seed rows with an adjoining side dress band or turbo band (7.5 inch to the side) that the corn roots access at V-5.
Operating on track suspensions at very low ground pressure at speeds of 10 mph at .909 acres per minute. The Exactrix Track Cart steers the tool bar with its own GPS dedicated receiver.
Sub 1 inch accuracy of nutrient bands is achieved with nutrient bands placed at 7 inch to 8 inch depths.
The net returns under pivot production is enhanced. Typically net returns increase $150.00 additional net return. The investment is often paid off in the first year.
Meeting your formulation needs.www.exactrix.com/TF.htm
Picking your metering systems.www.exactrix.com/EPM.htm
Need more information on advanced crop production.www.exactrix.com/EWAC.htm
For More Information: